FD-CZ05A type elevator weighing switch is a new generation weighing switch product developed successfully in our factory. it can provide the signal output of light load, full load and overload three kinds of loads needed for elevator control. potentiometer adjustment and self-learning are taken into account easier to use. Using non-contact sensor, simple and flexible installation, panel using precision adjustable potentiometer, make debugging simple and convenient. It can be installed in the central position of the bottom of the movable car or on the wire rope and rope head plate.
MORE
FFD-CZ06A type elevator weighing switch is a new generation weighing switch product developed successfully in our factory. it can provide the signal output of the switch quantity of light load, full load and overload required for elevator control. self-learning type makes the debugging work more simple and easy to use. The pressure sensor is used to make the elevator weighing more accurate and easy to debug. It can be installed in the central position of the bottom of the movable car or on the wire rope and rope head plate.
MORE
EW-CZ03A elevator weighing switch is a new generation weighing switch product successfully developed by our factory. It can provide switching signal output of light load, full load and overload load required by elevator control. Using non-contact sensor,
MORE
The device is suitable for all the movable bottom elevators and escalators which need to be overloaded and load signals, and can also be used for mechanical limit connection or near switch. The device has high performance-to-price ratio. Because Hall sensor is used to realize non-contact induction mode, the system does not bear elevator load directly, so it has the advantages of long working life, good stability, convenient installation and debugging, and overcomes the defects of mechanical overload switch which is easy to damage.
MORE
This device is suitable for all the movable car bottom elevators and escalators which need to be overloaded and load signals, and can also be used for mechanical limit connection or near switch. The device has high performance-to-price ratio. Because Hall sensor is used to realize non-contact inductive working mode, the system does not bear elevator load directly, so it has the advantages of long working life, good stability, convenient installation and debugging, and overcomes the defects of mechanical overload switch which is easy to be damaged.
MORE
The device is suitable for all movable sedan-bottom elevators with overload analog signals and escalators with energy saving operation can also be used for mechanical limit connection or near-switch. The device has high performance-to-price ratio. Because Hall sensor is used to realize non-contact induction mode, the system does not bear elevator load directly, so it has the advantages of long working life, good stability, convenient installation and debugging, and overcomes the defects of mechanical overload switch which is easy to damage.
MORE
WeChat Scan
Scan for more
Suzhou Zhikejingling Electromechanical Co.,Ltd.
Address:155 Zhongfeng street, high tech Zone, Suzhou
Tel:0512-66627461
Fax:0512-66627461
©2020 Suzhou Zhikejingling Electromechanical Co., Ltd. All Rights Reserved. Technical support:SuZhou Daoke
Mr Yu