扶梯传感器

KLA-MTU-01B

FFD-KLA-MTU-01B escalator fault display board is a new generation of products by our factory. It can monitor and display the running state of escalator and store the fault code for inquiry. The circuit is carefully designed and optimized, and the high reliable microprocessor is used to make the product run reliably and stably in various harsh environments. The novel programming scheme is applied to make the detection circuit have lower power consumption, less heat, more reliable hardware operation and longer life.

FFD-J24G

FFD-J24G elevator special microwave radar sensor is a high performance radar switch specially customized by our company according to the customer's demand. It can intelligently detect the direction and distance of passenger motion, so as to sense passengers more accurately and prevent the waste of electric energy caused by false judgment. The external setting switch of the product can flexibly adjust the radar sensing distance.

FFD-A24

1. Note: before use, please read this manual carefully so that the sensor can work better. 2. ■ do not adjust the sensitivity of the sensor very low, otherwise the sensitivity may not be enough to detect moving objects; 3. ■ make sure the sensor detection range is larger than the width of the channel. If the width of the detection range is narrower than that of the channel, the entry and exit of personnel may sometimes not be sensed, and two sensors should be installed to cover the whole channel; 4. ■ this product is escalator microwave non-contact sensor, it needs to be installed horizontally and firmly to the entrance of escalator;

Product Show

Escalator sensor

KLA-MTU-01B

FFD-J24G

FFD-A24