FFD-T02BT elevator voice station controller instructions

一、Summary

The FFD-T02BT elevator voice station controller is a high performance controller customized according to the special requirements of customers. The controller has a high performance MP3 playing circuit to meet the requirements of different elevators. All the key components of the circuit adopt imported components to ensure that the circuit is reliable, stable and long working time. Amplifier uses 15 W high fidelity integrated circuit, through careful wiring and high reliable programming to make the product in the industry has a high cost-effective. The voice content in the SD card can be changed at will, but the naming rules must be in accordance with the prescribed requirements, and the voice format is in a common MP3 or WAV format.

二、Main technical indicators

1. input operating voltage: DC12-30V

2. current :1 A

3. sensing distance :5 m (without spacer)

4.SD card capacity :1 G

5. power amplifier: W 2*15

6. Maximum Volume :>100 dB( Audio Volume)

7. trigger mode: pulse, level, timing mode (high level effective).

8. temperature :-30-80℃

9. relative temperature :<RH90%

10.Insulation :>100 MΩ(DC500V)

11. Pressure resistance: AC2500V /1Min (2mA)

三、Connection method and terminal function

Note :1, when there is no communication function A、B it is the input of trigger switch quantity, and there is no trigger function when communicating.

 2.DC DC input socket and terminal power input function, access 12-30 V DC power supply ,220 AC power supply can not be directly connected to the terminal or socket.

四、Overall dimension (unit: mm)

五、Debugging method

1. adjust the volume

 There are 30 volume levels adjustable by pressing the UP "or DOWN" key to adjust the playback volume. The current volume value is automatically remembered internally.

 2. adjustment of language and background sounds

 A、 by pressing the LG" key to adjust the playing language, press the English and Chinese languages to switch. The last adjustment will be remembered after the power off.

 B、 by pressing the "BG" key" to play background music adjustment, press the "background tone" and "background tone" to switch. The last adjustment will be remembered after the power off.

 3. Note on voice files:

 A、 file format must be MP3 and WAV, broadcast files must be placed on the FLOOR1、FLOOR2 and MUSIC. of the card

 1)FLOOR1： Putonghua Voice Documents

 2)FLOOR2： English voice files

3) MUSIC： background music documents

六、Matters needing attention

 1. access to the controller must be 10-30 V DC power supply, beyond or below this range of power access will cause the controller silent or burn out the controller.

 2. installation, please pay attention to the protection of the SD card, excessive external force will lead to damage to the SD card.

 3. controller should be kept away from the inflow of corrosive gas or liquid, which will lead to damage or life shortening of the controller.

 4. external trigger terminal is switch quantity closed trigger, can not access the power supply.