Product Show

Elevator contactless series

FFD-ZW-20W-G human body induction ultraviolet lamp


 

FFD-ZW-20W-G human body induction ultraviolet lamp

 

一、 Summary

 

This is the only problem. Package stores, schools, teahouses, factories, elevator boxes, etc.

 

Product size:

 

二、 Function description

 

 1. ultraviolet sterilization disinfection lamp, using 254 nm ultraviolet light wave (no ozone), sterilization and disinfection efficiency can reach 99.

 

 2. infrared intelligent detection of space environment, when no one or animals to start the ultraviolet light, when someone immediately shut down;

 

 3.Infrared human motion sensing protection device, when sensing someone (or other organisms), do not start or immediately stop the operation of ultraviolet disinfection lamp to ensure safety;

 

 三、 Electrical specifications

 

Property

Parameters

 Ballast

 

AC220V

Power supply voltage

Philips electronic ballast, on and off about 30000 times

 

Power

30w

/

Product size

924*65*48(mm)

UV spectrum

 254nm

UV lamp life

 The glass tube is made of quartz glass and contains a small amount of mercury

 

UV lamp

About 8000 hours

Luminous flux maintenance rate during lifetime

85%

UV intensity

107uw/cm²

Anti-virus scope

30m²

Human detection distance

3~6 m

Induction delay time

2min

Weight

1.1kg

Packing Size (Single Unit)

1080*75*80mm

 Gross

1.3kg


 

四、 Environment condition

 

Project

Specifications

Storage temperature range

-20 ~

70

Operating temperature range

-10 ~

60

Recommended operating temperature

5 ~  40This temperature range has the best anti-virus effect

Working humidity range

20%~80%

 

 

五、Notes on installation and commissioning

 

1.No live installation, wiring, high voltage danger.

 

2.UV lamp system installation of the best position ,2.0~2.5 meters from the ground.

 

3. Do not install near the air conditioning, need to stay away from temperature change sensitive place, to avoid infrared protection device false trigger.

 

4.When debugging, please avoid being exposed to ultraviolet lamp, do not be exposed to ultraviolet lamp for a long time. When the ultraviolet tube starts, we should pay attention not to directly illuminate the human skin, especially the human eye. When the ultraviolet germicidal lamp is lit, do not look directly at the lamp tube. Because the short wave ultraviolet ray does not pass through the ordinary glass, wearing glasses can avoid eye injury. When installing and debugging, operators should wear long-sleeved clothes and trousers with glass protective glasses to avoid accidents.

 

5. If the eye is accidentally injured, the general situation is not serious, serious eye drops to help recover.

 

6.Replace lamp tube: can be removed and replaced directly. To be replaced under power failure.

 

六、Waste disposal

 

    This lamp tube has a small amount of mercury, daily life can not be used as ordinary domestic waste treatment, need to be used as industrial waste, through the relevant departments to do professional treatment, destruction.

 

Online Communication
Mr Yu:15358803325

WeChat Scan
Mr Hao:13915573467