FFD-CJ13 Eelevator signal acquisition system

一.Summary

The elevator signal acquisition terminal uses the conventional external sensor mode to monitor the elevator running status and elevator failure. When the elevator is trapped, the linkage emergency platform will automatically alarm and inform the rescuer the rescue operation was carried out quickly and the trapped people were comforted by remote audio.

二 .System function：

●Elevator running state collection: collect elevator current status, running direction,current floor, door switchWhether there are people, power failure and elevator fault information.

● Elevator fault: can collect the following kinds of faults: non flat floor stop elevator,rush top, squat bottom, in operationOpen the door, speeding. long time sleepiness, etc.

●Fault alarm: Elevator number, fault type, fault time, elevator area, etc It will be transmitted to the elevator emergency disposal monitoring platform and linked to the platform for alarm.

●  Local and remote storage of fault data continuously save operation fault data.

●Comfort people in distress: support remote voice comfort

●the backup built-in rechargeable battery can ensure that it can continue to work normally for more than 1 hour after power failure.

●Network transmission: RS485 RJ45.4G.

●Input port: 13 isolated I0 inputs.

● Support access to elevator cloud management platform

三、Realization of network communication

四、Working principle of elevator acquisition terminal

四、Outline dimension drawing

四、技术参数

1.输入工作电压：DC24V         

2.传感器类型：外加 或 接入电梯系统RS485通讯协议

3.故障响应时间：5s              

 4.内置传感器：速度+加速度+角度

5.通讯方式：RS485

6.网络传输：RJ45 （4G选配）

7.显示方式：LCD液晶，调试方便，

8. 使用温度：-30--+80℃       

9.相对温度：< RH90%

10．绝缘：＞100MΩ （DC500V档）

11．耐压：AC2500V /1Min（2mA档）